6 Reasons
Why you ought to Upgrade Your PC Motherboard
When your PC is getting slow and it’s
time to upgrade it, you would possibly wonder: Should I upgrade my motherboard?
it's an important component of your system, but it’s not always easy to
understand, how and when you should upgrade your motherboard? Replacing the motherboard
are often expensive, but it also can bring you benefits in terms of speed,
hardware support, and better graphics support.
We’ll explain some reasons why you
ought to upgrade your motherboard and a few considerations to stay in mind once
you do.
1. To
empower CPUs to a faster processor (CPU)
If your CPU is quite new, the
performance gains that come from upgrading to a more modern one go to be
fairly minimal. If you've got a processor that’s three or more years old,
however, you’re getting to notice massive gains jumping to a more modern
processor.
But to try to that, you’ll need a motherboard that supports the upgrade.
And, if you’re upgrading for gaming,
save your money and upgrade your graphics card instead. latest games lean more
heavily on your GPU than your CPU.
2. To
permit use more or faster memory (RAM)
Making the
upgrade to newer iterations of RAM requires a motherboard which will support
those new RAM modules. If you’re currently using DDR3, for instance, you can’t
make the jump to DDR4 or the newer DDR5 without swapping out the motherboard
and therefore the CPU first.
The performance increase between
iterations of RAM, however, isn’t all that mind-blowing. If speed is that the
sole reason for the upgrade, rethink where you’re spending your money.
3. To
support a faster graphics card (GPU)
All of the above reasons are good,
but in my opinion, this is often the only greatest reason to upgrade your
motherboard.
If you’re a gamer or video editor, a
replacement CPU/motherboard combination and a higher-performance GPU will make
your PC desire a completely different machine.
Games will run faster and with less
lag, all while letting you increase the in-game settings to run at more graphically-intense levels than your previous card.
(Depending on once you last upgraded)
If you’re not a gamer, and you’re
more of an off-the-cuff internet user, the simplest bang for your buck goes to
be a RAM or SSD upgrade, and you'll skip GPU upgrades altogether.
4. For
Faster Data Transfers and to support the newest internal bus technologies, like
ATA/133 or Serial ATA.
Making the upgrade to SATA III or USB
3.0 increases the transfer speed of knowledge from one piece of hardware to a different.
for instance, SATA III features a maximum rated speed of 6Gbps and USB 3.0 tops
out at 5Gbps. Both are fast enough for easy file and data transfers, but the
highest-end SSDs top out around 2Gbps in terms of transfer speed. Most don’t
even hit that mark.
There are other considerations at
play, like SATA III, is quicker than USB 3.0 thanks to driving options like
native queuing, and USB 3.0’s disadvantage of being a shared bus.
But the truth of the matter is that
while both are fast enough for what you’ll need them to try to, neither will
hit their max speeds. You’ll probably need to
upgrade your motherboard on an older system so as to use them.
It’s not all sunshine and rainbows in
upgrade land, however. For those of you that don’t have tons of experience in
building your own PCs and don’t typically catch on to written tutorials all
that quickly, you'll be spending the extra money to repair novice mistakes.
5. you've
got Damaged Parts or to extend your slot potential.
Damaged motherboards are an
infrequent but huge problem. Snapped pins, disconnected plugs, electricity
discharge, and other issues will all lead you back to the fix-it shop to shop
for new plugs, or, hopefully, to urge knowledgeable installation.
The same thing goes for fire damage,
smoke damage, water damage, and even physical trauma from impact.
Remember, the CPU/motherboard upgrade
is one among the foremost expensive upgrades you'll make to your existing PC.
If you aren’t confident in your
ability to match up parts or to properly piece everything together once you’re
within the midst of your build, it’s always
getting to be best to opt for knowledgeable installation instead of the
value of replacing damaged hardware, or to extend your slot potential upgrading
your motherboard is going to be the proper choice for you…
6. If you
would like NEW FEATURES or the features which enable you to use external
peripherals via USB or FireWire technology.
Finally, you would possibly not
believe motherboards as things which accompany exciting features. But there are
technological developments within the world of motherboards. And you'll want to
upgrade to require advantage of those.
For example, you would possibly want
to use an M.2 SSD. this is often a really small format SSD which screws
directly into your motherboard. But you’ll need a motherboard which supports
M.2 drives for this to figure. Or perhaps you would like a computer which
supports fast transfers via Thunderbolt 3, during which case you’ll need a
motherboard with Thunderbolt 3 connectivity.
Finally, if you’re looking to squeeze
a touch more performance from your system or you’re just looking to find out,
you would possibly want to undertake to overclock your CPU. to try to this,
you’ll needn't only an overclockable CPU but also a motherboard which supports
overclocking.
Beware of
Issues with Compatibility.
To facilitate an upgrade, you’ll get
to match up your new hardware to your existing hardware — otherwise, you can go
buy a group of all new equipment.
The most critical jiff is that the
motherboard and CPU must match. More specifically, the motherboard CPU socket
must match that of the CPU’s socket. for instance, if the motherboard supports
LGA 1150, your CPU must support that also.
There are other considerations too,
like BIOS compatibility, TDP support, and therefore the number of SATA ports.
you'll use online sites like PC Part Picker, which is a useful resource for
first-time PC builders, to see whether your parts are compatible with one another.
Selecting
the proper RAM
Remember that the choice of DDR3,
DDR4 and therefore the emergence of DDR5 RAM means you’ll need to take extra
caution to make sure that your motherboard/CPU combo is capable of handling the
required memory you decide on. If it’s not, you’ll get to upgrade.
Unfortunately, there isn’t a workaround for this one, but you'll write it off
as a learning experience.
The RAM’s frequencies and voltage
must also match up to the motherboard’s required range. 1,333, 1,600, 1,866,
2,133 and 2,400MHz with voltages of 1.65v should match up equally to the stated
range of the motherboard.
Meaning, if you've got 2,400MHz RAM
and use it with a 2,133MHz CPU at 1.65v, you'll run into compatibility issues
that would be detrimental to performance or cause machine failure.
Check Out
Bottlenecks When Upgrading Your Motherboard
Note that, the motherboard connects
to the CPU, RAM, HDD, GPU, and other hardware, so it’s not only important to
make sure compatibility, but also that you simply aren’t experiencing a
bottleneck within the system somewhere.
No matter how smartly your
CPU/motherboard combination is, it’s still conditional on an existing adapter
cards that control video, storage, and processing speed (as it relates to RAM).
If any of those items are on their last legs,
incompatible, or lagging behind in performance, your entire machine can slow to
a crawl with or without the new CPU/motherboard combo.
No comments:
Post a Comment